Manufacturer/Origin:
CamilleBauer/Switzerland
Wiring print with screw terminals
|
Programmable shaft transmitter for angular position to be KINAX 2W2
installed
Converts the angular position of a shaft into a load independent direct current signal,
proportional to the angular shaft position. The unit is contact free and has minimal
mechanical abrasion.
Main features
• Compact transmitter for angular position to be installed into other equipments
• Capacitive scanning system provides absolute position immediately after activation
• No wear, low annual maintenance and mountable anywhere
• Measuring range, sense of rotation, characteristic, switching point programmed using PC
• Adjustement / Independent fine adjustment of the analog output, zero position and measuring
range
• Simulation of measured values / The testing of the subsequent device chain is already possible
during the installation phase
• Measured value acquisition / Display of the instantaneous value and a trend graph of the
measured value on the screen
• Characteristic of the output value / Programmable as a linear, V-characteristic, or any
characteristic curve
• Small bearing play influence < 0.1%
• Small starting torque < 0.001 Ncm
• Available with explosion protection “Intrinsic safety” Ex ia IIC T6
• Can be mounted within the hazardous area
Technical data
Measuring range: Programmable between
0 ... 10°, 0 ... 50°, 0 ... 350°
Measuring output: 4 ... 20 mA with 2-wire connection
Power supply: 12 ... 33 V DC (non intrinsically safe version)
12 ... 30 V DC (intrinsically safe version)
Residual ripple in
output current: < 0,3% p.p.
Accuracy: Error limit ≤ ±0.5%
Reproducibility: < 0,2%
Response time: < 5 ms
Electrical connections: Soldering terminals (protection class IP 00 acc. to EN 60 529) or
wiring print with screw terminals
Mechanical data
Starting torque: < 0.001 Ncm with shaft 2 mm
< 0.03 Ncm with shaft 6 mm resp. 1/4”
Clearance influence: ±0.1%
Drive shaft diameter: 2 mm, 6 mm or 1/4”
Admissible static
loading of shaft:
Mounting position: Any
Material: Chromated aluminium
Shaft: rust-proof hardened steel
Weight: Approx. 100 g |
